Engineered for functional parts
Matte finish hides layer lines
Strong layer adhesion
Tough, matte, production-ready.
This carbon-fiber reinforced PETG is the same material we run for PrintFlow3D parts at Prinjekt in 24/7 production. It prints like PETG, but with extra stiffness and a clean, low-gloss finish that helps hide layer lines—ideal for jigs, fixtures, housings and everyday functional parts.
Good to know: Use a hardened (or stainless) nozzle—the carbon fiber is abrasive. Keep the spool dry for the smoothest surfaces.
Variants: Choose 1 kg for regular jobs or 5 kg for longer, continuous runs (approx. 1 kg ≈ 330 m; 5 kg ≈ 1650 m).
In the box: 1 × PETG-CF filament spool — selected size and color.
For recommended print settings and technical details, see the Key Specifications section.
| Material | Carbon-fiber reinforced PETG (PETG-CF) |
|---|---|
| Diameter & tolerance | 1.75 mm ±0.03 mm |
| Spool sizes | 1 kg (≈ 330 m) • 5 kg (≈ 1650 m) |
| Surface finish | Matte / low-gloss; hides layer lines |
| Suggested settings | Nozzle 250–280 °C • Bed 70–80 °C • Fan ≤ 50% • Retract 1–3 mm |
| Build surface | PEI or glass; PVP glue optional |
| Nozzle | Hardened steel or stainless (abrasive) |
| Density (typ.) | ~1.32 g/cm³ |
| Melt flow (typ.) | ~4.3 g/10 min (220 °C / 2.16 kg) |
Typical values from material datasheet; results vary by printer and settings.
1 × PETG-CF filament spool — choose 1 kg or 5 kg. Color: Black (unless stated otherwise).
CEO of Prinjekt
